1998 volvo v70 heater core replacement




Article Navigation:
  • Photo
  • Volvo , S70, V70, C70 - How to replace the heater core
  • Video
  • RELATED PAGES
  • Oct 18, Ok, I just finished replacing the heater core. I tried to follow other thread showing heater core replacement, but it is not really right for.

    Sep 16, Tutorial: Replace the heater core on a Volvo , S70, V70, This post should apply to all s and first generation , S70, V

    FACT! Volvo is a Swedish automotive company. The name of the concern comes from the Latin language "Volv" and translates as "spinning", "rolling".

    Jan 6, Heater Core replacement for , V70 , S70 Early Volvo models used all metal copper and brass heater cores.

    Many components must be removed in order to separate the ducting from the vehicle, as it often sprawls across the majority of the dashboard. The amount of deconstruction involved will leave many DIYers with a stack of parts, and a car they cannot reassemble. Detach the pipes from the heater unit. When the heater unit is free of the upper part of the climate control system it can be removed to the side. Get it repaired in a city near you.

    Attention Required! | Cloudflare

    The heater core looks like a very small radiator, and functions just the same. It is mounted under the dashboard. It provides the heat needed for the blower motor to warm the cabin. As the engine water pump circulates engine coolant through the heater core, it heats the heater core to engine temperature.

    When heat is desired, the blower motor blows air across the heater core, and sends heat from the engine into the cabin. On newer vehicles, when heat is not desired, the blend door actuators change the flow of air away from, or partially away from the heater core to reduce the amount of heat allowed into the cabin. Older vehicles used a more simple component called the heater control valve. This valve stops the flow of engine coolant into the heater core, and the core is cooled sufficiently to stop production of heat in the cabin.

    A failing heater core may cause a vehicle to smell of engine coolant inside the cabin. The majority of the smell will come from the vents while the heater is turned on, and from the floor under the dashboard.

    Also, the engine may being to run increasingly warmer until the vehicle is repaired. The worst case scenario is engine overheating, and possible engine head gasket failure. If the heater core is simply clogged, the heater in the vehicle will blow slightly warm air, even on the hottest setting.

    If the heater core is leaking, it is not advised to drive the vehicle as overheating can result from any coolant leak.

    In this situation, towing the vehicle to a repair facility is the best course of action. When the heater core is simply clogged, it will not affect drivability in any way, but passenger comfort may be negatively affected. Heater core issues are most commonly associated with lack of engine cooling system maintenance, as corrosion inside the heater core is the cause of most failures. As engine coolant sits in the engine, anti-corrosive agents help prevent corrosion and rust.

    The majority of vehicles will never need a heater core replacement, but without the factory scheduled coolant flushes the heater core may not make it to , miles. Heater core diagnosis is as easy as smelling inside the vehicle, and feeling the carpet under the dashboard. The heater core may leak enough coolant onto the carpet to saturate the carpet and underlayment. Puddling may occur in the floorplan. If the heater core has not leaked onto the carpet, but the strong smell of coolant is in the vehicle, the heater core is still suspected.

    The smell of coolant from the heater vents may be cause for confirmation if the smell of coolant is not outside the vehicle. Replacing the heater core in some models can be done by removing the HVAC duct case, which is situated under the dashboard. Many components must be removed in order to separate the ducting from the vehicle, as it often sprawls across the majority of the dashboard. In many cases, the dashboard must be removed from the vehicle to access the heater core.

    Once engine coolant lines are removed, and the heater core is accessed, the new heater core will be placed in the HVAC ducting case, and mounted back into the vehicle. Once all reconstruction is complete, the heater core is connected to heater core hoses, and the engine coolant is topped off and bled of air.

    ipd Volvo Dash Removal - S70 V70 C70



    • Подписаться по RSSRSS
    • Поделиться VkontakteVkontakte
    • Поделиться на FacebookFacebook
    • Твитнуть!Twitter

    Leave a Reply

    Return to Top ▲TOP ▲